0.6-2.5t/h wood saw dust dryer biomass rotary dryer

Short Description:

Sawdust dryer are widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves and other fiber materials.

Advantages: large output, wide application, small flow resistance, large allowable fluctuation range in operation, convenient operation.


  • :
  • Product Detail

    Product Tags

    Overview of biomass rotary dryer

    Rotary dryers are used to dry small, powdery or granular wet materials such as wood chips, sawdust, sand, mineral dust, agricultural waste, etc.

    The raw material is transported by the scraper conveyor to the inside of the rotary dryer.and the front is equipped with a hot blast stove. The generated hot air enters the dryer by the fire separating device, and the material is dispersed by the low-speed rotation and bending plate.so that the high-temperature airflow passes through the material and make heat exchange, the rotary dryer has a certain angle of inclination, and sufficient air volume to drive the material forward.Finally, the dried material is discharged from the discharge port.

    Features of biomass rotary dryer

    滚筒烘干_09

    1.Temperature measurement sensors and digital display instruments are installed at the high and low-temperature pipelines of the drying system to achieve the best drying effect and ensure the safe operation of the system.

    2. It can be equipped with a mechanical chain coal-fired hot blast stove, which has strong adaptability to coal types, and the overall thermal efficiency can reach more than 80%. The average coal consumption per ton of precipitation is not more than 176kg of standard coal.

    滚筒烘干_10
    滚筒烘干_16

    3.This machine also have gas cleaning system. With cyclone, air fan, wet dust filter. Without pollution.

    4. The drum body adopts screw + plate structure, double-layer plate and turnover plate are continuously turned up and down to make the material fully touch with the hot air, promote the heat exchange, ensure the drying efficiency.

     

    滚筒烘干_15

    According to your raw materials, we also provide three-layer rotary drum dryer, three-layer rotary drum dryer which can improve the internal structure of the original single drum dryer, increase the pre-drying of wet materials before entering the machine and prolong the drying time of wet materials in the machine, Coupled with sealing, heat preservation and reasonable supporting measures, the production capacity of the dryer is increased by 48-80% compared with the original single cylinder dryer, the evaporation intensity per unit volume can reach 120-180kg/m3, and the standard coal consumption is only 6-8kg/t. Moreover, it effectively reduces the occupied area, and the smaller volume is convenient for sea transportation.

    Specification of biomass rotary dryer

    Model
    Main motor
    (kw)
    Capacity( t/h)
    (moisture from 50% to 15%)
    fan
    (kw)
    airlock
    (kw)
    Diameter
    (m)
    ZSHG1.0-10
    5.5
    0.2~0.4
    7.5
    1.5
    Φ1.0*10
    ZSHG1.2-12
    5.5
    0.3~0.6
    7.5
    1.5
    Φ1.2*12
    ZSHG1.5-12
    7.5
    0.4~1.0
    15
    2.2
    Φ1.5*12
    ZSHG1.5-15
    11
    0.5~1.2
    18.5
    2.2
    Φ1.5*15
    ZSHG1.6-18
    15
    0.7-1.8
    22
    3
    Φ1.6*18
    ZSHG1.8-18
    15
    0.9~2.1
    22
    3
    Φ1.8*18
    ZSHG2.0-20
    18.5
    1.2~2.8
    30
    3
    Φ2.0*20
    ZSHG2.2-24
    18.5
    1.7~3.8
    30
    4
    Φ2.2*24

    CASE of biomass rotary dryer

    With 20 years’ experience in rotary dryer and biomass pellet line, our machines have been exported to more than 50 countries and won praise from local customers.

    4-5t/h wood waste drying pellet plant

    Capacity:4-5t/h

    Pellet size:6/8mm pellet

    Main machine:Wood chipper,hammer mill,wood drying plant,wood pellet mill,cooling machine and packing machine

    Delivery time:40-50 working days

    Production line:Morroco

    2-3t/h wood waste drying pellet plant

    Capacity:2-3t/h

    Pellet size:8/10mm pellet

    Main machine:Wood chipper,hammer mill,wood drying plant,wood pellet mill,cooling machine and packing machine

    Delivery time:35 working days

    Production line:Russia

    2-3t/h wood waste drying pellet plant

    FAQ of biomass rotary dryer

    1. Are you a manufacturer or trading company?

    We are manufacturer with 20 years' experience.

    2. How long is your leading time?

    7-10 days for the stock, 15-30 days for the mass production.

    3. What is your payment method?

    30% deposit in T/T advance, 70% balance before shipment. For regular customers, more flexible payment ways are negotiable

    4. How long is the warranty? Does your company supply the spare parts?

    One year warranty for main machine, wearing parts will be provided at cost price

    5. If I need the complete crushing plant can you help us to build it?

    Yes, we can help you design and set up a complete production line and offer relative professional advice.

    6. Can we visit your factory?

    Sure, you are warmly welcome to visit.


  • Previous:
  • Next: